BTH Taogu 08 Electric Kiln
Model: BTH-SYL-D08D
Net clearance volume: 0.08m ³
Opening method: Top opening door
Dimensions: L917 (including thermostat) * W886 * H860 (mm) ± 10
Inner chamber size: Ø 480 * H460mm
Shed board: Ø 385 (MM) * 1 piece/layer (delivered on one layer)
Power supply: 220V ± 10V (50HZ)
Power: 7.6KW
Current: 35A
User idle: 2P/63A
User wire diameter: 2 * 10+1 * 6 square national standard copper core wire
Thermocouple: S-type, single point temperature control
Furnace wire: Domestic alloy furnace wire, circular arrangement
Intelligent instrument: 4.3-inch, 6 sets of programs, 12 segment curve settings
Temperature difference inside the furnace: ± 3 ℃
Rated temperature: 1240 ℃
Curb weight: ≈ 114KG
Frame material: Q235-A+aluminum alloy
Surface treatment: electrostatic spraying, gray
Usage: Oxidation firing of conventional ceramic works
Parameter introduction
Model: BTH-SYL-D08D
Net clearance volume: 0.08m ³
Opening method: Top opening door
Dimensions: L917 (including thermostat) * W886 * H860 (mm) ± 10
Inner chamber size: Ø 480 * H460mm
Shed board: Ø 385 (MM) * 1 piece/layer (delivered on one layer)
Power supply: 220V ± 10V (50HZ)
Power: 7.6KW
Current: 35A
User idle: 2P/63A
User wire diameter: 2 * 10+1 * 6 square national standard copper core wire
Thermocouple: S-type, single point temperature control
Furnace wire: Domestic alloy furnace wire, circular arrangement
Intelligent instrument: 4.3-inch, 6 sets of programs, 12 segment curve settings
Temperature difference inside the furnace: ± 3 ℃
Rated temperature: 1240 ℃
Curb weight: ≈ 114KG
Frame material: Q235-A+aluminum alloy
Surface treatment: electrostatic spraying, gray
Usage: Oxidation firing of conventional ceramic works
Product description
Product Function Introduction
Ⅰ、 Product appearance
Color:
The product color is a combination of chrome and gray, presenting the initial appearance of the product through its own color.
appearance:
The product adopts a design language of round sky and square earth, with circles as the main body, visually reflecting the portability and lightness of the product, while ensuring stability in use.
Ⅱ、 Product Structure:
1. The top cover door opening method is supported by a semi-automatic hydraulic lever flip cover, which solves the problem of manual support for traditional top cover door opening.
2. Multi layer insulation structure, composed of aluminum alloy, Mitsubishi blanket, and refractory high-temperature bricks, ensures stable temperature difference inside the kiln.
3. Full brick structure effectively reduces the volatilization of carcinogenic substances.
4. The circular furnace wire structure and thermal energy distribution algorithm ensure that the temperature difference of the kiln is controlled within ± 3 ℃.
5. Fluid mechanics design, based on Bernoulli fluid mechanics principles, designs exhaust ducts to improve kiln efficiency.
Ⅲ、 Main materials of the product
1. The body is made of aluminum alloy material with strong resistance to high temperature, oxidation, and corrosion; A high percentage of chromium and nickel provides much better creep strength, allowing for continuous operation at high temperatures and excellent high-temperature resistance;
The furnace support frame is made of Q235-A steel, which has good plasticity, processability, weldability, and corrosion resistance. Its mechanical properties are relatively stable, with high strength and toughness. At low temperatures, Q235A steel also has good toughness.
2. The furnace wire is made of advanced domestic iron chromium aluminum alloy material, with a long service life. The furnace wire can withstand a high temperature of up to 1300 degrees Celsius for heating.
3. JM26 lightweight refractory brick, low heat melting, low thermal conductivity of 0.2-0.4w/m.k, less accumulated heat energy, fast furnace heating, effectively reducing energy consumption.
Ⅳ、 Product performance/functionality
1. All brick "no" cotton design, the surface utilization rate of Mitsubishi blanket in the entire kiln is about 0.05%, which is less prone to volatile carcinogens and reduces energy consumption by 30%.
2. The surface alloy will not change color or yellow for ten years.
3. The product weighs approximately 114kg (the lightest in China with the same capacity) and saves on handling costs.
4. During the firing process, the sound is light (like the sound of a household refrigerator starting).
5. Light lid opening, using bidirectional hydraulic rod: the opening force is light (like picking up a bottle of 500ML mineral water).
6. Portable and quick to disassemble, users can perform simple maintenance.
7. Low energy and electricity consumption, fast firing time (firing can be completed in 17 hours).
8. The temperature difference inside the kiln is ± 3 ℃, and the product firing effect is good.
9. 5G Internet independently developed temperature control system, with a Chinese and English operating interface, user-friendly operation (including over temperature alarm, fault query, automatic saving of firing data, remote real-time control, anti misoperation start stop and other functions), comes with 3 one click firing curves, customizable 3 curves, each curve contains 12 firing curves, can be freely set, and output power can also be freely set.
10. The 360 ° rotating universal wheel can move at any angle.
11. One click easy lock door (apply force as if pressing the water bottle lid switch).
12. The controller screen is designed ergonomically for easy and quick disassembly, meeting the comfort level of different people holding the controller.
13. Power off function when opening the door (if the door is accidentally opened during the kiln firing process, the power will be immediately cut off to prevent danger).
( WeChat)